Load data for .32 ACP (7.65 Browning) + .312 | 100gr | Hornady XTP

Recommended Powder(s): Maxam CSB 2, Ramshot Zip, ReloadSwiss RS 12, Vihtavuori N320, Winchester 231

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.312 \| 100gr \| Hornady XTP
Manufacturer SKU:	32070
Bullet Weight:	100gr \| 6.5g
Bullet Diameter:	0.312" \| 7.92mm
Bullet Length:	0.563" \| 14.3mm
Caliber:	.32 ACP (7.65 Browning) load data
Case Length (l3):	0.677" \| 17.2mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.271" \| 6.9mm
Shank Seated Depth:	0.271" \| 6.9mm
Case Capacity:	9.3 Grains of Water \| 0.60 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	23206 psi \| 1600 bar
LID:	LID_B2728_C409
Last updated:	2025-01-01

Load data for 76 loads in caliber .32 ACP (7.65 Browning) with .312 | 100gr | Hornady XTP bullet and 38 powders such as Maxam CSB 2, Ramshot Zip, ReloadSwiss RS 12, Vihtavuori N320, Winchester 231. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	76%	19580	84%	**3	98%
ADI APS 350	<<locked>>	70%	19450	84%	**8	100%
ADI APS 450	<<locked>>	72%	19174	83%	**5	100%
ADI AS 30	<<locked>>	81%	19856	86%	**7	100%
ADI AS 50N	<<locked>>	79%	19769	85%	**3	100%
[Accurate No. 2]*	<<locked>>	82%	19914	86%	**3	87%
Accurate Solo 1000	<<locked>>	75%	18043	78%	**4	100%
Accurate Solo 1250	<<locked>>	90%	19667	85%	**3	97%
Alliant BULLSEYE	<<locked>>	75%	18652	80%	**0	92%
Alliant UNIQUE	<<locked>>	90%	18434	79%	**9	91%
Baschieri & Pellagri 100	<<locked>>	83%	19435	84%	**7	100%
Hodgdon Clays	<<locked>>	70%	19522	84%	**8	100%
[Hodgdon Longshot]*	<<locked>>	74%	20726	89%	**6	83%
Hodgdon Universal	<<locked>>	84%	19580	84%	**3	98%
Lovex S011	<<locked>>	67%	18318	79%	**7	98%
Lovex S020	<<locked>>	84%	19029	82%	**0	94%
Maxam CSB 1	<<locked>>	91%	18362	79%	**0	97%
Maxam CSB 2 👍	<<locked>>	96%	18362	79%	**9	100%
Maxam CSB 3	<<locked>>	87%	19696	85%	**3	100%
Maxam CSB 4	<<locked>>	81%	19029	82%	**3	100%
Maxam CSB 5	<<locked>>	77%	19653	85%	**7	100%
[Ramshot Silhouette]*	<<locked>>	77%	20189	87%	**9	89%
Ramshot Zip 👍	<<locked>>	64%	20436	88%	**6	99%
ReloadSwiss RS 12 👍	<<locked>>	87%	20755	89%	**9	100%
ReloadSwiss RS 20	<<locked>>	93%	17869	77%	**6	93%
Rottweil P 801	<<locked>>	77%	20436	88%	**6	100%
SNPE Vectan A0	<<locked>>	91%	19421	84%	**0	91%
SNPE Vectan BA 9	<<locked>>	84%	20842	90%	**6	96%
SNPE Vectan BA10	<<locked>>	67%	19160	83%	**1	100%
SNPE Vectan BA9 1/2	<<locked>>	84%	18768	81%	**0	97%
Somchem MP200	<<locked>>	85%	20044	86%	**3	90%
Somchem MS200	<<locked>>	89%	20436	88%	**9	93%
[Vihtavuori 3N37]*	<<locked>>	97%	20015	86%	**9	83%
Vihtavuori N320 👍	<<locked>>	85%	20160	87%	**3	100%
Vihtavuori N32C Tin Star	<<locked>>	92%	11792	51%	**5	100%
Vihtavuori N330	<<locked>>	89%	19464	84%	**9	99%
Vihtavuori N340	<<locked>>	88%	18318	79%	**0	91%
Winchester 231 👍	<<locked>>	71%	20436	88%	**6	99%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]²	<<locked>>	58%	11879	51%	**9	92%
ADI APS 350	<<locked>>	61%	15780	68%	**6	100%
ADI APS 450	<<locked>>	64%	15650	67%	**2	100%
ADI AS 30	<<locked>>	64%	13518	58%	**2	100%
ADI AS 50N	<<locked>>	64%	13793	59%	**5	98%
[Accurate No. 2]*	<<locked>>	69%	13895	60%	**9	81%
Accurate Solo 1000	<<locked>>	60%	12227	53%	**6	97%
Accurate Solo 1250	<<locked>>	70%	11545	50%	**6	90%
[Alliant BULLSEYE]*	<<locked>>	63%	13184	57%	**8	86%
[Alliant UNIQUE]*	<<locked>>	71%	11516	50%	**5	82%
Baschieri & Pellagri 100	<<locked>>	63%	11081	48%	**6	94%
Hodgdon Clays	<<locked>>	61%	15693	68%	**6	100%
[Hodgdon Longshot]*	<<locked>>	70%	18202	78%	**3	81%
[Hodgdon Universal]*²	<<locked>>	58%	9979	43%	**6	89%
Lovex S011	<<locked>>	61%	15374	66%	**5	96%
[Lovex S020]*	<<locked>>	66%	11197	48%	**5	85%
[Maxam CSB 1]*	<<locked>>	70%	11110	48%	**9	89%
Maxam CSB 2	<<locked>>	68%	9152	39%	**9	94%
Maxam CSB 3	<<locked>>	65%	11429	49%	**6	95%
[Maxam CSB 4]²	<<locked>>	59%	10689	46%	**3	97%
Maxam CSB 5	<<locked>>	61%	12952	56%	**2	100%
[Ramshot Silhouette]*	<<locked>>	62%	13024	56%	**1	81%
[Ramshot Zip]²	<<locked>>	59%	17521	76%	**7	97%
ReloadSwiss RS 12	<<locked>>	62%	10124	44%	**2	98%
[ReloadSwiss RS 20]*	<<locked>>	74%	11342	49%	**5	83%
[Rottweil P 801]²	<<locked>>	59%	11864	51%	**5	100%
[SNPE Vectan A0]*	<<locked>>	71%	12169	52%	**6	82%
[SNPE Vectan BA 9]*	<<locked>>	66%	13024	56%	**5	89%
[SNPE Vectan BA10]²	<<locked>>	59%	15635	67%	**2	100%
SNPE Vectan BA9 1/2	<<locked>>	64%	11458	49%	**9	90%
[Somchem MP200]*	<<locked>>	68%	12836	55%	**8	82%
[Somchem MS200]*	<<locked>>	64%	10965	47%	**9	82%
[Vihtavuori 3N37]*	<<locked>>	92%	17434	75%	**3	81%
Vihtavuori N320	<<locked>>	64%	11095	48%	**2	98%
Vihtavuori N32C Tin Star	<<locked>>	83%	9790	42%	**3	100%
[Vihtavuori N330]*	<<locked>>	64%	9747	42%	**6	89%
[Vihtavuori N340]*	<<locked>>	69%	11168	48%	**2	82%
Winchester 231	<<locked>>	60%	14823	64%	**8	95%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.